Com-Pak Parts and Accessories

The Com-Pak is an efficient, affordable wall heater, and a snap to install. With multiple installation options and proven safety features, the Com-Pak gives your family safe, sensible warmth for years.
  • Product Family:Com-Pak Parts and Accessories

Need help choosing the right product for your room? Click Here for Heater Selection Tips »

Ordering Information

A “T” in the model number means a built-in single pole thermostat is included. Model numbers without a “T” require a separate thermostat. For optimum comfort use a Cadet electronic wall thermostat. These models work best at elevations under 10,000 feet.

Technical Information

UL safety standards require the heater to be placed a minimum distance of 6 inches (15.2 cm) from adjacent surfaces and 4-1/2 inches (11.4 cm) from the floor. Cadet recommends a 12-inch clearance from all surfaces for longer and cleaner performance. A 3-foot (91.44cm) minimum clearance is required for furniture or other objects placed directly in front of the heater. All models 1500 watts or less may be ceiling installed. Electric wall heaters and thermostats work best when installed on an inside wall. We recommend installing the heater assembly after walls are finished. Heater must be cleaned every six months minimum.

Dimensions

Rough-In

8"W x 10-1/4"H x 4"D

Wall Can

7-7/8"W x 11-1/2"H x 4"D

Grill

9"W x 12"H x 1"D

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha