Added to Cart
The Com-Pak Bath - Refurbished
The premier choice for today's bathrooms
Features and Benefits
- Instant warmth in bathrooms: save energy by only turning up the heat where you need it most!
- Convenient built-in controls
- Single pole thermostat temperate range: 45º-105º F, plus a "no heat” setting
- 60 minute timer overrides thermostat setting for instant warmth - Thermal Safeguard
- High temperature manual reset: turns off heater if normal operating temperatures are exceeded - Sealed, painted, rust resistant heating element
Multi-Volt unit is factory wired at 240 volt, changes to 120 volt with quick switch of a wire, so you can install in any bathroom setting - Unique low profile white grill only 1/2” deep
- All refurbished products carry a limited 90 day warranty
General Information
The Com-Pak Bath Heater by Cadet is perfect for today’s lifestyle. Safe, durable, and easy to install, this heater allows you to save energy by turning up the heater only where you need it most.
Equipped with a built-in thermostat and 60-minute timer, it is a great option for adding supplemental heat to any room. The 60-minute auto- timer overrides the thermostat setting for instant warmth and comfort. Once timer expires, control of the heater will return to the previous thermostat setting or thermostat disabled position.
Because the Com-Pak Bath Heater fits into any C/CS series wall can, it is a great option for replacement, remodel or new construction. Factory set at 240 volts, this unique multi-volt heater easily switches to a 120 volt unit with a quick wire change.
All refurbished products carry a limited 90 day warranty
Ordering
Need help choosing the right wattage?
Click Here for Heat Selection Tips »
- Complete unit includes heater assembly, wall can, grill, thermostat and timer.
- Multi-Volt: Factory set at 240V, change to 120V with switch of a wire.
- Recommended for elevations under 7500 feet.
- Limited to stock on hand.
Rough In Dimensions:
8"W x 10.25"H x 4"D
Wall Can Dimensions:
7.875"W x 11.5"H x 4"D
Product Dimensions:
10"W x 12.625"H x .5"D
Available Refurbished Models:
| Model# | Description | 240V | Watts 120V | 208V | 240V | Amps 120V | 208V | Price | QTY | Add to Cart |
| CBC103TW | Heater assembly, grill, wall can, thermostat and timer. Multi-Volt White | 1000 | 1000 | 4.16 | 8.33 | $102.00 | ||||
| CB103T | Heater assembly, thermostat and timer. Wall can and grill sold separately. Multi-Volt | 1000 | 1000 | 4.16 | 8.33 | $99.99 | ||||
| CB132T | Heater assembly, thermostat and timer. Wall can and grill sold separately. Multi-Watt | 500/ 800/ 1300 | 375/ 600/ 975 | 2.09/ 3.33/ 5.42 | 1.80/ 2.89/ 4.69 | $99.99 | ||||
| CBC132TW | Heater assembly, grill, wall can, thermostat and timer. Multi-Watt White | 500/ 800/ 1300 | 375/ 600/ 975 | 2.09/ 3.33/ 5.42 | 1.80/ 2.89/ 4.69 | $102.00 |
Need help choosing the right wattage? Click Here for Heat Selection Tips »
Looking for a replacement part? Click Here for Parts & Accessories »
[+]imageArchitectural Information:
Fan forced electric air heaters shall be UL listed, factory rated at 120V/240V or dual field rated from 208V to 240V. The painted wall mounting can is made from 20-gauge sheet metal with six electrical knockouts and a 22 cubic inch wiring compartment. Each heating unit shall be of unitized construction and attach to the wall can with a single screw and shall be self contained and completely separate from the wall mounting can. Elements shall be tube and plate, painted, with an over-sized 16 amp rating at 240V high temperature manual reset limit switch. A centrifugal blower shall be driven by an impedance protected motor. The motor shall be totally isolated from the heating element. Metal grill shall be of one piece, 20-gauge construction, and finished with a powder coat paint system.
Technical Information:
All heaters include a built-in single pole thermostat and 60-minute timer. The Com-Pak Bath Heater is not to be used with a wall thermostat. The multi-volt option must be configured for the correct voltage before installing the heater. The multi-watt option must be configured for the desired wattage before installing the heater. UL requires heater to be placed a minimum distance of 6” from adjacent surfaces and 4.5” from the floor. Manufacturer recommends installation 12” from all surfaces. A 3’ minimum clearance is recommended for furniture or other objects placed directly in front of heater.
NOTE: Manufacturer recommends installing heater assembly after walls are finished. Heater must be cleaned every six months minimum.
