Energy Plus

Energy Plus

More comfort, less energy

The smart choice for your comfort and your wallet, the Energy Plus uses up to 30% less energy than regular wall heaters. Say goodbye to temperature swings—intelligent controls and auto adjusting fan speed maintain room temperature within one degree. And control your comfort with a simple, built-in, backlit digital thermostat.

  • Now with even quieter operation with new motor
  • Use up to 30% less energy with automatically adjusting wattage and fan
  • Easy, safe install – the smart sensor auto adjusts the heater voltage to match your 120, 208 or 240 volt power supply
  • Easily upgrade: uses same wall can as Com-Pak series heaters so no wall patchwork or additional wall board cut outs are required
  • Experience more comfort with precise, consistent temperature control and an auto adjusting fan speed that eliminates wide temperature swings
  • Built-in digital thermostat with simple controls, a large digital display, and no complicated programming
  • Night or Away button allows you to pre-set a secondary, lower temperature for nights or when you’re out of the room
  • Keep the air circulating year-round with the fan-only mode
  • Tamperproof settings let you set minimum and maximum temperature points
  • Proudly made in the USA
  • 5-year warranty
  • ETL listed

Need help choosing the right product for your room? Click Here for Heater Selection Tips »

Find your model:

showing 1 models of 1 total

Energy Plus

Complete Unit w/Thermostat, Multi-Volt

Color: white
Watts at 120V: 1000
Watts at 240V: 1600
Watts at 208V: 1500
Amps at 120V: 8.3
Amps at 240V: 6.7
Amps at 208V: 7.2
Part #: 65215
Weight: 8.1 lbs
wishlist or compare

Ordering Information

The Energy Plus fits pre-existing vertically mounted wall cans for the Com-Pak Series heaters and for the following models: C, CB, CM, CS, FX, X. This model cannot be used to replace Com-Pak heaters installed in FW and RB model wall cans.

All heaters include a high performance built-in digital thermostat—a wall thermostat may not be used to control this heater. Temperature range:40˚F to 85˚F.

Available in white only.

Technical Information

UL safety standards require the heater to be placed a minimum distance of 3/4 inches (1.9 cm) from adjacent surfaces and 4-1/2 inches (11.4 cm) from the floor. Cadet recommends a 12-inch clearance from all surfaces for longer and cleaner performance. A 3-foot (91.44 cm) minimum clearance is required for furniture or other objects placed directly in front of the heater.

Install vertically. This heater is not approved for horizontal or ceiling installation.

Electric wall heaters and thermostats work best when installed on an inside wall. We recommend installing the heater assembly after walls are finished. Heater must be cleaned every six months minimum.


8"W x 10-1/8"H x 4"D

Wall Can
7-7/8"W x 11-1/2"H x 4"D

9"W x 12"H x 5/8"D

Available Downloads
Rated 5 out of 5 by from Excellent upgrade! These new heaters are wonderful. I installed two of them in a rental. Now I'm going to install them in my house too. They heat the room fast and then slow down to a quiet purr. And having the temperature display is great. Much better than the older units.
Date published: 2018-01-13
Rated 2 out of 5 by from Great heat, bad noise Have had 2 of these for a year. They work well. BUT - the fan motor is very noisy on both. Even at lowest speed. Obvious design flaw. Tried to contact Cadet but never received any reply. Will not buy again, since my wife hates the noise. The cheaper, low tech models are MUCH quieter (I also have 2 of them) and cost half as much. Too bad, since they work great otherwise.
Date published: 2017-08-11
Rated 5 out of 5 by from best on market I love that it can be changed form 120 to 240 with the multi-volt power supply. I was going to put in radiant heat under the tile but when the electrician explained that if the grout needed repair and the wire got nicked the wiring was trash unless the floor was pulled, he had seen that happen before. He suggested the Cadet wall heater said it was the best one he had seen and easy to install. I love it, my installer loves it. The heater was installed in Essex, Ct. in an apartment unit of a 2 family house and the bathroom had no heat source. Because of the bathrooms location no forced air duct could be added, so the only heat was leave the door open!! This little heater cranks out the heat and the room is now toasty warm (and now you can close the door). The quality is there because it's made in the USA
Date published: 2017-02-28
Rated 4 out of 5 by from Great functionality, but looks could be better. Easy to set up, great support when I had a quick question and work great in my bathroom. I'm using it on an existing 120V circuit, so only getting 1000W and it warms up quick. Never gets so hot that I'm worried about my kids getting burned. Controls are simple and intuitive. The only gripe I have is the looks. The grill feels and looks cheap, it's only secured by 2 screws in the center top/bottom which causes the sheet metal sides to bow ever so slightly. Should be clipped at the 4 corners to the box to prevent bowing and maybe use a thicker piece of steel or plastic that doesn't bow. It's also weird that the controls are black and the grill is white and while we're at it, press the logo in the material instead of the logo plaque.
Date published: 2016-11-29
Rated 4 out of 5 by from Very quite Just bought this model and it's really like the features it has.
Date published: 2016-02-21
Rated 4 out of 5 by from sounded good Remodeled bathroom and wanted to replace a new wall heater that one could barely feel 2 feet in front of it. Chose this one because of advertised energy saving and it would heat up a room larger than the bathroom. Also had safety features. Takes longer than expected to heat up the little bathroom.
Date published: 2016-01-27
Rated 5 out of 5 by from I like the compact size of this powerful little heater! I was so happy to see how fast it heated up my bathroom. Also it is a plus for this room ! Actually it is a very pretty heater and I am stuck on CADET heaters. I will be buying another one very soon for another bathroom!
Date published: 2016-01-26
Rated 5 out of 5 by from Great Upgrade I bought this unit to replace a normal wall heater without a thermostat once I upgraded a bonus room above my garage. Works great for climate control.
Date published: 2016-01-21
  • y_2018, m_7, d_17, h_21
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_1, tr_15
  • loc_en_US, sid_Energy_Plus, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_cadet
Com-Pak Wall Can
Com-Pak Wall Can
Model# CC

Wall can designed for use with Cadet's Com-Pak series heaters (CS, CM, CB) or Energy Plus (CE) wall heater.  Recesses into wall for a clean finish.

Part #: 67061
wishlist or compare
18.5 X 22 Inch Metal Adapter Plate (white)
18.5 X 22 Inch Metal Adapter Plate (white)
Model# CAMW

Allows for replacement of older or obsolete electric wall heaters without having to repair wall. Use with Com-Pak (C, CS), Com-Pak Max (CM), Com-Pak Bath (CB), or Energy Plus (CE) series heaters.

Part #: 67105
wishlist or compare
12 X 21.25 Inch Metal Adapter Plate (white)
12 X 21.25 Inch Metal Adapter Plate (white)
Model# SAMW

Use with Com-Pak (C, CS), Com-Pak Max (CM), Com-Pak Bath (CB), or Energy Plus (CE) series heaters to replace older or obsolete heaters.

Part #: 67115
wishlist or compare
Com-Pak Surface Mount Wall Can (white)
Com-Pak Surface Mount Wall Can (white)
Model# CCSMW

Allows for quick and easy installation of Com-Pak series (CS, CM) and Energy Plus (CE) and Apex72 (HW) wall heaters on surfaces unsuitable for recessed installation.  Does not require a separate wall can.

Part #: 69111
wishlist or compare