Com-Pak Twin

Com-Pak Twin

Ideal warmth for larger areas

The Com-Pak Twin is just what you need to quickly warm up large rooms. Two heaters behind a single grill easily fend off cold drafts and breezes in entryways and open areas.

  • Ideal for large rooms and open areas, such as foyers and entryways
  • Warms up quickly with fast-heating coil elements and efficient fans
  • Rest easy—includes high-temperature safety shutoff feature
  • No sharp edges and a smooth, durable finish
  • Designed for easy installation
  • Enjoy years of trouble-free use, thanks to durable, reliable design
  • Available with or without a built-in thermostat
  • Proudly made in the USA
  • 2-year warranty
  • ETL listed to UL standards

Need help choosing the right product for your room? Click Here for Heater Selection Tips »


Narrow by:

Ordering Information

A “T” in the model number means a built-in single pole thermostat is included with a temperature range of 40˚F to 85˚F. Model numbers without a “T” require a separate thermostat. For optimum comfort use a Cadet electronic wall thermostat.

These models work best at elevations under 10,000 feet.

Technical Information

UL safety standards require the heater to be placed a minimum distance of 6 inches (15.2 cm) from adjacent surfaces and 4-1/2 inches (11.4 cm) from the floor. Cadet recommends a 12-inch clearance from all surfaces for longer and cleaner performance. A 3-foot (91.44 cm) minimum clearance is required for furniture or other objects placed directly in front of the heater.

Install horizontally. This heater is not approved for vertical or ceiling installation.

Electric wall heaters and thermostats work best when installed on an inside wall. We recommend installing the heater assembly after walls are finished. Heater must be cleaned every six months minimum.

Dimensions

Rough-In
14-1/2"W x 10-1/8"H x 4"D

Wall Can
14-1/2"W x 11-1/8"H x 4"D

Grill
16-1/4"W x 12"H x 1"D

Available Downloads
Rated 5 out of 5 by from Very Reliable, Excellent price, with a smile. My Wall heater, the CT/CST 402 wall hear has been proven in everyday use, year after year, In my case about 8 years, In ALL the time service. Family depended upon this unit for Life's necessary heat, and after All that time and Hard use when one side had problems, the the other side still worked well enough that I can say you Can bet your life on this unit. When It's time for part's (Nothing last's forever) The Co.and staff are very friendly, helpful, Knowledgeable, and will get you what you need "Quick" Obviously I'm very satisfied with the whole unit and support, I'm 59 and don't need problems. I Highly Recomend this unit.
Date published: 2016-12-07
Rated 5 out of 5 by from This will heat a large room more quickly than you can imagine. I have installed several of these; one on a renovated porch and three in a new house. The heating power of this unit is remarkable. A couple of cautions: the air coming out of this is very hot, with high air-flow. It is not silent, about as loud as a normal hair dryer so be aware of that and the location you are installing it.
Date published: 2016-03-29
Rated 5 out of 5 by from These heater heat the house quickly I live in Michigan. I was looking to replace 9 old baseboard heaters to get better heating efficiency. Since no ductwork existed (and I read ducts cause a 30% loss of heat anyways) I was looking for a more efficient way to heat the house. These heaters provide a fan to move the radiant heat out, and look like ducts anyways. This unit replaced an old 10ft baseboard heater. This unit really heats up the room quickly. The noise is equivalent to a forced air heating system I've had in the past. I was able to install the unit and thermostat within an hour including cutting the wallboard and wiring. Still waiting to see the effect on my electric bill though.
Date published: 2016-01-04
Rated 5 out of 5 by from Minimum space used Have a twin unit heater in our living room and keeps it very comfortable and takes very little wall space.
Date published: 2015-12-22
Rated 5 out of 5 by from Long term use then failed. I installed this unit 12 years ago and have had no trouble all that time. I use it in my shop as the primary heating source. It provides more then enough heat for the 500 sq foot shop. It has operated from Oct to April 24/7 all that time. It did fail, but I consider this more then acceptable. I like it so much that I'm going to replace it with the same model.
Date published: 2015-12-19
Rated 5 out of 5 by from Gives out a lot of heat in a short time period! What a wonderful product! Puts out a lot of heat in a short period of time, to heat a kitchen/dinette/living room area of our 500 square foot Guest House! Easy to install! Small enough on the wall, so it looks GREAT on the wall! Fits my decor beautifully!
Date published: 2015-11-14
Rated 5 out of 5 by from Fast powerful heat. I installed three of these and they heat the rooms so fast they are hardly on. Nice and quiet and efficient. Only negative was one of three Honeywell thermostats fried and Honeywell would not replace it but Cadet did, with excellent service call handling.
Date published: 2015-10-26
Rated 5 out of 5 by from Heats evenly We installed this heater in the wall & it works great. It is heating a 1000 sq ft family room that use to be our garage. The heat is evenly distributed throughout the room.
Date published: 2015-10-10
  • y_2017, m_10, d_17, h_2
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_5, tr_18
  • loc_en_US, sid_com-pak-twin, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_cadet
Com-Pak Twin Grill Kit (white)
Com-Pak Twin Grill Kit (white)
Model# CTGW

For use with Com-Pak Twin (CT, CST) series wall heaters. Easily installs with a flat head screwdriver and provided screws.

Part #: 67089
$35.00
Qty:  
wishlist or compare
Com-Pak Twin Grill Kit (almond)
Com-Pak Twin Grill Kit (almond)
Model# CTGA

For use with Com-Pak Twin (CT, CST) series wall heaters. Easily installs with a flat head screwdriver and provided screws.

Part #: 67090
$35.00
Qty:  
wishlist or compare
Com-Pak Twin Wall Can
Com-Pak Twin Wall Can
Model# CTC

Wall can designed for use with Cadet's Com-Pak Twin (CST) series heaters.

Part #: 68005
$33.00
Qty:  
wishlist or compare
Com-Pak Built-in Thermostat Kit, SP, 22 Amp, White
Com-Pak Built-in Thermostat Kit, SP, 22 Amp, White
Model# CTT1W

Single pole (2 wire) thermostat kit for built-in control of the Com-Pak (CS), Com-Pak Twin (CT), or Com-Pak Max (CM) series heaters.  Temperature range: 40˚F to 85˚F.

Part #: 67063
$17.00
Qty:  
wishlist or compare
Com-Pak Built-in Thermostat Kit, SP, 22 Amp, Almond
Com-Pak Built-in Thermostat Kit, SP, 22 Amp, Almond
Model# CTT1A

Single pole (2 wire) thermostat kit for built-in control of the Com-Pak (CS), Com-Pak Twin (CT), or Com-Pak Max (CM) series heaters.  Temperature range: 40˚F to 85˚F.

Part #: 67065
$17.00
Qty:  
wishlist or compare
Com-Pak Built-in Thermostat Kit, DP, 22 Amp, White
Com-Pak Built-in Thermostat Kit, DP, 22 Amp, White
Model# CTT2W

Double pole (4 wire) positive off thermostat kit for built-in control of the Com-Pak (CS), Com-Pak Twin (CT), or Com-Pak Max (CM) series heaters. Temperature range: 40˚F to 85˚F.

Part #: 67064
$22.00
Qty:  
wishlist or compare
 Com-Pak Built-in Thermostat Kit, DP, 22 Amp, Almond
Com-Pak Built-in Thermostat Kit, DP, 22 Amp, Almond
Model# CTT2A

Double pole (4 wire) positive off thermostat kit for built-in control of the Com-Pak (CS), Com-Pak Twin (CT), or Com-Pak Max (CM) series heaters. Temperature range: 40˚F to 85˚F.

Part #: 67066
$22.00
Qty:  
wishlist or compare
Com-Pak Tamper-proof Built-in Thermostat Kit, 22 Amp, SP
Com-Pak Tamper-proof Built-in Thermostat Kit, 22 Amp, SP
Model# CTTP

Single pole (2 wire) 22 Amp thermostat kit for tamper-proof built-in control of the Com-Pak (CS), Com-Pak Twin (CST), or Com-Pak Max (CM) series heater.

Part #: 67067
$22.00
Qty:  
wishlist or compare
Com-Pak Twin Metal Adapter Plate 18-1/2"W x 22"H, White
Com-Pak Twin Metal Adapter Plate 18-1/2"W x 22"H, White
Model# CTAMW

Use with Com-Pak Twin (CST) series heaters to allow for replacement of older or obsolete electric wall heaters without having to repair wall.

Part #: 68075
$45.00
Qty:  
wishlist or compare
Com-Pak Twin Metal Adapter Plate 18-1/2"W x 22"H, Almond
Com-Pak Twin Metal Adapter Plate 18-1/2"W x 22"H, Almond
Model# CTAMA

Use with Com-Pak Twin (CST) series heaters to allow for replacement of older or obsolete electric wall heaters without having to repair wall.

Part #: 68070
$45.00
Qty:  
wishlist or compare
Com-Pak Twin 4" Surface Mount Adapter, White
Com-Pak Twin 4" Surface Mount Adapter, White
Model# CTS4W

Use for surface mounting any Com-Pak Twin (CT) series heater where it's not possible or convenient to recess the heater. Also requires a wall can (CTC) for installation to mount inside.

Part #: 69104
$52.00
Qty:  
wishlist or compare
 Com-Pak Twin 4" Surface Mount Adapter, Almond
Com-Pak Twin 4" Surface Mount Adapter, Almond
Model# CTS4A

Use for surface mounting any Com-Pak Twin (CT) series heater where it's not possible or convenient to recess the heater. Also requires a wall can (CTC) for installation to mount inside.

 

Part #: 69100
$52.00
Qty:  
wishlist or compare