Electric Baseboard

Electric Baseboard

Sensible, quiet heat starts here

Take the chill out of any room with our most popular baseboard heater. Enjoy the simple warmth of reliable, quiet convection heat. All our Cadet baseboards are designed for easy installation and will keep you warm for years to come.

  • Practical design is ideal for new construction and built to last
  • Easy installation with pre-punched knockouts at 1-inch intervals
  • Universal wiring available at either end
  • Proven construction helps maximize surface area and funnel heated air
  • Place under a window for best results
  • Rest easy—includes high-temperature safety shutoff feature
  • Durable, powder-coated finish stands up to nicks and scratches
  • Proudly made in the USA
  • Lifetime warranty
  • ETL listed to UL standards

Need help choosing the right product for your room? Click Here for Heater Selection Tips »


Narrow by:

Ordering Information

All Cadet baseboard heaters require a thermostat. For optimum comfort use a Cadet electronic wall thermostat, or or choose the convenience of a built-in BTF model thermostat.

8F2500 models are 312 watts per foot. Standard dual-rated 240/208 volt models are 250 watts per foot at 240 volt, and low density 187 watts per foot at 208 volt.

Technical Information

Baseboard heaters work best when placed under a window and at least 12 inches away from furniture or other objects. Keep at least a 12-inch minimum distance from objects hanging above (i.e., drapes).
Do not install below electrical outlets.
The heater may be placed directly on the floor and mounted to the wall.

Dimensions

Product
6-3/4"H x 2-1/2"D x Length Varies

Available Downloads
Rated 5 out of 5 by from good product bought as a replacement
Date published: 2017-03-19
Rated 4 out of 5 by from Works well It was fairly easy to install required electrical knowledge to install thermostat. Heater works well and keeps bedroom warmer.
Date published: 2016-11-22
Rated 5 out of 5 by from Great product This product was a snap to install. Took less than an hour. It provides a great source of heat and keeps the space nice and warm with little effort. The product does not have to run continuously as I feared it might. I was happy it is an American Made Product!
Date published: 2016-11-13
Rated 1 out of 5 by from Loud Hum plus Crackle and Pop I bought the white 2500 watt Cadet heater to replace an older one for two reasons; I repainted the walls in the room and the color of the old heater no longer looked good, and the older heater was 10 feet long and the Cadet heater of the same wattage is only 8 feet long. The old heater was completely silent throughout all stages of operation. Unfortunately, the new Cadet heater had a loud hum and crackled and popped (loudly) as it heated up and cooled down. The wording on the box that the heater came in said "Quiet Heat Starts Here." This heater did not provide quiet heat. I ended up returning the new Cadet heater.
Date published: 2016-10-23
Rated 4 out of 5 by from great replacement!! I recently replaced my 1970s bb heaters with Cadet's 1500 watt 240 volt heaters. Instalation is simple. However, I must strongly recommend before installing them hook them up to adequate power outside to "burn off" the manufacturer oil used in production of these heaters. It does mention the oil in the directions booklet. Other than that, these heaters are a great way to keep my place warm through WV winters & also they freshen up a room with quiet and much quicker heat than those being replaced!
Date published: 2016-10-12
Rated 5 out of 5 by from Matched color of baseboard Remodeled a office into a den, worked out well
Date published: 2016-07-15
Rated 4 out of 5 by from Works as advertised, mounting screws visible Is quieter than other baseboard heaters I have used. I added the thermostat to the unit itself. Was an easy conversion. Only fault is the mounting screws are visible through the heat outlet
Date published: 2016-04-06
Rated 5 out of 5 by from Great addition to our home Recently installed electric baseboards in rooms that didn't have heat. I wish I would have installed sooner. I am very happy with this product.
Date published: 2016-02-29
  • y_2017, m_6, d_27, h_14
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_5, tr_28
  • loc_en_US, sid_cadetbb, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_cadet
Smart-Base
Smart-Base
Model# SBFT2W

Smart-Base Thermostat Kit Retail Pack DP, 12.6A, White

Part #: 03400
$69.00
Qty:  
wishlist or compare
Built-in baseboard thermostat, Single Pole (almond)
Built-in baseboard thermostat, Single Pole (almond)
Model# BTF1A

Thermostat Kit, Single Pole, 22 Amp, Almond

Part #: 14910
$21.00
Qty:  
wishlist or compare
Built-in baseboard thermostat, Double Pole (almond)
Built-in baseboard thermostat, Double Pole (almond)
Model# BTF2A

Thermostat Kit, Double Pole, 22 Amp, Almond

Part #: 14920
$26.00
Qty:  
wishlist or compare
Built-in baseboard thermostat, Single Pole (white)
Built-in baseboard thermostat, Single Pole (white)
Model# BTF1W

Thermostat Kit, Single Pole, 22 Amp, White

Part #: 14915
$21.00
Qty:  
wishlist or compare
Built-in baseboard thermostat, Double Pole (white)
Built-in baseboard thermostat, Double Pole (white)
Model# BTF2W

Thermostat Kit, Double Pole, 22 Amp, White

Part #: 14925
$26.00
Qty:  
wishlist or compare
BTF1TPA
BTF1TPA
Model# BTF1TPA

Thermostat Kit Tamper Proof, Single Pole, 22 Amp, Almond

Part #: 14930
$29.00
Qty:  
wishlist or compare
BTF2TPA
BTF2TPA
Model# BTF2TPA

Thermostat Kit Tamper Proof, Double Pole, 22 Amp, Almond

Part #: 14940
$32.00
Qty:  
wishlist or compare
BTF1TPW
BTF1TPW
Model# BTF1TPW

Thermostat Kit Tamper Proof, Single Pole, 22 Amp, White

Part #: 14932
$29.00
Qty:  
wishlist or compare
BTF2TPW
BTF2TPW
Model# BTF2TPW

Thermostat Kit Tamper Proof, Double Pole, 22 Amp, White

Part #: 14942
$32.00
Qty:  
wishlist or compare
120V Receptacle Plate (white)
120V Receptacle Plate (white)
Model# BRF12W

Install conveniently on either end of a standard Cadet baseboard heater to provide a 120 volt outlet. Requires a separate 120V supply wire.

Part #: 14902
$20.00
Qty:  
wishlist or compare
120 Volt Receptacle Plate (almond)
120 Volt Receptacle Plate (almond)
Model# BRF12A

Install conveniently on either end of a standard Cadet baseboard heater to provide a 120 volt outlet. Requires a separate 120V supply wire.

 

Part #: 14900
$20.00
Qty:  
wishlist or compare
Load Transfer Switch & Outlet (white)
Load Transfer Switch & Outlet (white)
Model# LTF240W

Installs conveniently to either end of your baseboard heater to provide a switching option between heating and air conditioning.

Part #: 14963
$75.00
Qty:  
wishlist or compare
Load Transfer Switch & Outlet (almond)
Load Transfer Switch & Outlet (almond)
Model# LTF240A

Installs conveniently to either end of your baseboard heater to provide a switching option between heating and air conditioning.
 

Part #: 14960
$75.00
Qty:  
wishlist or compare
Baseboard Corner Connector, white
Baseboard Corner Connector, white
Model# BLF1W

Baseboard Corner Connector that works either inside or outside.

 

Part #: 14971
$15.00
Qty:  
wishlist or compare
Baseboard Corner Connector, almond
Baseboard Corner Connector, almond
Model# BLF1A

Baseboard corner connector that works either on inside or outside.

Part #: 14970
$15.00
Qty:  
wishlist or compare
Electric Baseboard Mounting Tool MTX
Electric Baseboard Mounting Tool MTX
Model# MTX

Limited access, wiring mounting tool. Speeds up installation of baseboard heaters and eliminates nailing holes in the back of the case.

 

Part #: 11030
$33.00
Qty:  
wishlist or compare