Above all, more room

Bring warmth to your room without sacrificing living space. Our new Apex72 heater is installed high on your wall, so you’re free to place furniture where you like, and the heater is out of reach for little hands. The quiet fan efficiently spreads the comfort of warm air throughout the entire room.

  • Gain living space - place furniture where you like
  • Higher placement is ideal for homes with kids or pets - mount 72 inches above floor
  • Contemporary look blends seamlessly into any room
  • Cover secured by strong magnets, yet detaches easily for cleaning
  • Outlet grill is available in two designs
  • Recommended cleaning every 24 months, compared with six months for most wall heaters
  • Enjoy lasting warmth, thanks to durable sealed heating element
  • Includes high-temperature safety shutoff feature
  • Proudly made in the USA
  • 5-year warranty
  • ETL listed

Need help choosing the right product for your room? Click Here for Heater Selection Tips »

Find your model:

showing 2 models of 2 total


Complete Unit Kit w/TH114 Electronic Thermostat


Color: white
Watts at 240V: 1000
Amps at 240V: 4.2
Part #: 65403
Weight: 9.8 lbs
wishlist or compare

Complete Unit Kit w/TH114 Electronic Thermostat

Color: white
Watts at 120V: 1000
Amps at 120V: 8.3
Part #: 65402
Weight: 9.8 lbs
wishlist or compare

Ordering Information

An Apex72 heater assembly, CC model wall can, orient ring, and decorative cover are all required for new installation, and sold separately or as a kit. Choose a decorative cover packaged with an outlet grill in a louvered or hexagonal pattern.

All units require an electronic wall-mounted thermostat. Use ACCA Manual J (residential load calculation) or local codes for determining appropriate heater wattage for your space.

Technical Information

UL safety standards require the heater to be placed a minimum distance of 72 inches from the floor, 6 inches (15.2 cm) from adjacent surfaces, and 10 inches (25.4 .cm) from the ceiling. Maximum distance from bottom of wall can to floor is 90 inches for ceilings 9 feet and higher. For ceilings greater than 9 feet, a ceiling fan with a cooling thermostat is recommended for optimum performance.

Install horizontally only. This heater is not approved for vertical or ceiling installation.

Electric wall heaters and thermostats work best when installed on an inside wall. We recommend installing the heater assembly after walls are finished. Heater must be cleaned every 24 months minimum.


12”W x 8-1/2”H x 1”D

10”W x 7-7/8”H x 4”D

Wall Can
7-7/8"W x 11-1/2"H x 4"D

Available Downloads
Rated 5 out of 5 by from Works great! We installed this heater in a room with limited wall space to replace a poorly located wall unit. It's quiet and it's nice and cozy in the living room.
Date published: 2017-12-02
Rated 1 out of 5 by from So disappointing We installed one in each of our bathrooms. The bathrooms are so small that we had no wall space to install traditional cadet heaters. They don't have enough fan strength to move the air at all. It's like a dying hair dryer. Now we have a hole in the wall and even if we returned them we aren't going to get the money we spent on the electrician who we hired to install them.
Date published: 2017-11-08
  • y_2018, m_7, d_17, h_21
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_2
  • loc_en_US, sid_apex72, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_cadet
Com-Pak Wall Can
Com-Pak Wall Can
Model# CC

Wall can designed for use with Cadet's Com-Pak series heaters (CS, CM, CB) or Energy Plus (CE) wall heater.  Recesses into wall for a clean finish.

Part #: 67061
wishlist or compare
Com-Pak Surface Mount Wall Can (white)
Com-Pak Surface Mount Wall Can (white)
Model# CCSMW

Allows for quick and easy installation of Com-Pak series (CS, CM) and Energy Plus (CE) and Apex72 (HW) wall heaters on surfaces unsuitable for recessed installation.  Does not require a separate wall can.

Part #: 69111
wishlist or compare